Updated : May 01, 2020 in Others


Refer to page A-6 for details. Page 29 1 Before Use Installing and Connecting the Heads and Optional Parts Installing the Head 1 Adjust the distance between the head and the measuring target, and fix the head with the screws at the two installation holes. The function of each measurement mode is as follows. The settings return to the default setting when shipped from the factory. Sets the number of times of averaging. The alarm process has the following two types.

Uploader: Tajar
Date Added: 19 September 2009
File Size: 26.34 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 78608
Price: Free* [*Free Regsitration Required]

Regardless of the setting of the timing synchronization, the fixed measurement value of each OUT number is outputted in this format. The data being set keysnce all the data may be lost.

The upper limit of the tolerance setting is displayed. Page 18 List of Functions and Function Nos. The measured value can be displayed and output in 3 steps: In addition, for ensuring the safe connection of the cord, leave 65 mm space or more in front of the terminal panel of the controller. Be sure that no potential difference is generated between the common terminals due to the potential difference between wires or external devices.

Enters the tolerance setting mode.

What’s missing? Tell us about it.

Page 5 RSC Command details This section describes the details of the incoming commands and the response commands that are sent when the incoming commands are properly processed. Sets the control range of ABLE. Each head can perform measurement individually, and the measurement values between the heads can be calculated.


Page 51 2 Operations and Functions during Measurement Hysteresis If the measurement value is fluctuating around the tolerance keywnce value, the comparator output may repeatedly turn on and off. The following three types are available. Press the key, and select function “[” with the key. Press the key to perform copying.

Releases the holding when the measurement value is reset.

KEYENCE Lk-gd500 LKGD500 Laser Displacement Sensor Controller

Target workpiece Description b-0 nor keyehce Normal Select this setting in normal cases. The following two types of setting are available for ABLE. Page 61 3 Function Settings Setting the Head This section describes the settings related to the sensing for stable detection.

Register the setting contents that correspond to a measuring target as programs in advance.

KEYENCE Lk-gd LKGD Laser Displacement Sensor Controller | eBay

Page 72 3 Function Settings Functions keyejce and ” ” specify the following sub-functions. Use this function when the reflective ratio of the target changes drastically in a short cycle.

Set the alarm process. Page 35 1 Before Use Attaching the ND Filter Option If the head is installed for specular reflection and and the measurement target is a shiny mirror or glass surface, the measurement accuracy may deteriorate.

When the mutual interference prevention lk-hd500 is set to ON, the two heads emit the laser beam alternately to evade the interference from the other. Page 41 1 Before Use 4 Install the display panel fixing case along the groove on the controller. Set the scaling of the analog output. Press the and keyyence, and set the number of times with the keys. Page 49 2 Operations and Functions during Measurement Setting uzb Tolerance Comparator Value This section describes how to read the tolerance comparator display, and its setting procedure.


Select the corresponding type from the following list. A-5 List of Optional Products Reference Both upper-case and lower-case characters can be used in the commands. The current measurement value is loaded if the key is pressed.

Page 47 Operations and Functions during Measurement 2 This chapter describes the operations that can be performed during displacement measurement and their functions. Page RSC This chapter describes how to connect external devices and the communication functions for external operation.

Symptom Checking content Nothing is displayed on Are the controller and the the monitor display. By calling up a program as desired, you l,-gd500 easily change between targets.