Updated : Jan 13, 2021 in Monitors


The solution for win 98 is to go to this url: Page 64 These fields specify whether the system will be awakened from power saving modes when activity or input signal of the specified hardware peripheral or component is detected. Don’t have an account? Refer to the hard disk documentation supplied by hard disk vendors for jumper setting instructions. To use the feature, you need to define the burst length, which is the actual length of burst plus the starting address and allows internal address counter to properly generate the next memory location.

Uploader: Mogore
Date Added: 20 September 2014
File Size: 41.81 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 81916
Price: Free* [*Free Regsitration Required]

Page 50 The system will boot from the Network drive. Case Open Warning The field enables or disables the feature of recording the chassis intrusion status and issuing a warning message if the chassis is once opened.

Nothing but grief from the realtek site and the driver CD that came with the mobo. Table of Contents Add to my manuals Add. The solution for win 98 is to go to this url: The sound quality has deteriated from my old SB Live, and I wanted to be able to retire that card.

The items under each BIOS category described in this chapter are under continuous update for better system performance.


Safety Instructions Always read the safety instructions carefully. Floppy Disk Drive Connector: It 7638 a 66MHz, bit channel for the graphics controller to directly access main memory.

MSI KM2M Combo-L – motherboard – micro ATX – Socket A – KM266 Series

Checked the onboard audio controller in the bios, which is set to “auto”. Hardware Setup Chapter 2. I believe the problem is that I can’t retrieve the audio drivers from the companion cd, since I only have windows ’98 OS. Each category includes no, one or more than one setup items.

A-1 Using 4- or 6-Channel Audio Function Page 13 CPU and chipset.

A new BIOS is usually released due to the following reasons: Refer to the hard disk documentation supplied by hard disk vendors for jumper setting instructions. If you have changed this setting, you must let the system boot up until it enters audik operating system, before this function will work.

MSI KM2M Combo-L, Socket A, AMD (MS-6738-010) Motherboard

Page 78 Using 4- or 6-Channel Audio Function 4. Then return to pin position. Page 76 Using 4- or 6-Channel Audio Function 6-Channel Mode for 6-Speaker Output Refer to the following diagram and caption for the founction of each jack on the mms panel when 6-Channel Mode is selected.


Then push it in. You can clear CMOS by shorting pin while the system is off. You can barely see the golden finger if the module is properly inserted in the socket.

By pressing ‘print’ button you will print only current page.

MSI KM2M Combo-L – motherboard – micro ATX – Socket A – KM Overview – CNET

Bursting feature is a technique that DRAM itself predicts the address of the next memory location to be accessed after the first address is accessed. When the cd is inserted I get the message “setup does not support your operating system”.

Hardware Setup Central Processing Unit: Got it, continue to print.

Enter text from picture: I assume the driver I need is there, but mss do I manually run setup from there? Please follow the special tech issue, http: Min Saving Minimum Power Management. Setting to Off will allow users to use the arrow keys on the numeric keypad. BIOS Setup best mode for each device. Connect the fan to the power sup- ply connector provided on your mainboard.